1. Assemble Hose To Tank
IMPORTANT: Do not attempt to heat or alter
hose, hose nut, or barb prior to assembly.
1. Align hose barb tabs, push hose barb into tank
until it stops (See Figure A).
2. Slide hose nut into place and turn clockwise to
tighten. (See Figure B).
NOTE: Do not use tools to tighten hose nut.
Figure A Figure B
2. Assemble 24” Brass Wand
Place 176332 check valve inside of 182566 brass
wand. Then place brass teejet nozzle and cap on
top and screw into place (See Figure C)
Note: Check valve must be always be used.
182566 Brass Wand
Figure C
4. Assemble Wand to XL Valve
Screw on Wand Assembly to XL Valve using a 13/16”
wrench. (See Figure E)
Figure E
182563 XL VALVE
Wand Assembly
3. Assemble XL Valve to Hose
Screw on XL Valve to end of hose from sprayer. Using
a 9/16” wrench for sprayer hose and a 3/4” wrench for
the XL Valve tighten securely. (See Figure D)
Figure D
SETTING UP YOUR CONCRETE
R301 SPRAYER
190451
Conguration for nozzle tip sprayers
Check Valve
Disassemble adjustable nozzle to use cap nut with nozzle tip.
182563 XL VALVE
Backpack Hose
Commentaires sur ces manuels